August 2021 2021 08 25 Authors: Massimo, Colin * Working with the SiPM and the laser diode in the lab * We don't have anything to digitize the signals with...
December 2020 eLog 2020 12 29 Author: Colin * Now have got Network UPS Tools (NUT) working for UPS in the ctalab * This will shutdown the server automat...
February 2022 eLog 2022 02 07 Author: Colin, Massimo * connection profiles on ctalab computer (odo) * Ethernet for internet (eno1) should be connected w...
January 2021 eLog 2021 01 20 Author: Colin, Massimo * Couldn't access the PSU through odo, it was something to do with the serial USB connection permissions ...
July 2021 eLog 2021 07 29 Author: Laurel * motion control GUI doing this weird thing where it says the motor is on when it's not * only happening with a...
May 2021 eLog 2021 05 25 Author: Massimo * Following suggestion by F. Licciulli, checked voltage regulators on FPGA board (U3, U6, U7). U3 has 5V in input and...
November 2020 eLog 2020 11 25 * Author: Massimo, Colin * Mounted side flange to pass cables through (see attached picture) and started to set inside equipm...
September 2021 eLog 2021 09 09 Author: Colin * Working with the frankenflasher again * FrankenFlasher: Flasher Fs PSoC board, Flasher Ss LED board ...