June 2021 eLog


Author: Massimo

  • Replaced U6 with new ADP3338; the power supply immediately reaches compliance, lowering voltage from input 5V to 2V roughly. Also, ADP338 immediately starts heating up, there is still a short somewhere. Check capacitors FC05/6?


Author: Massimo with support from Ray

  • We replaced the ADP3338 again, but there still is a short between Vout (which should be 3.3V) and ground. We then removed the ADP3338 and checked (short still there) the first immediate components downstream of the 3.3V
    • FC06
    • U3
    • FC01
  • Nothing helped
  • Asked Francesco L. for extra ideas and otherwise for spare board

-- Massimo Capasso - 2021-06-08


This topic: Veritas > PSCT > NevisLabsSetup > NevisLabsELog > NevisLabsELogJune2021
Topic revision: r2 - 2021-06-09 - MassimoCapasso
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback