January 2022 eLog


Author: Colin, Massimo

  • In the lab again
  • Starting to assemble the module in its cage
  • Some problem areas:
    • The screws that secure the standoffs on the FEE to the cage aren't flush against the cage, they jut out a little bit
    • Finding that some of the samtec cables are getting scratched at the edge
      • scratched_samtec_2.jpeg
  • Two important notes:
    • The front part of the cage can be mounted already:
      • Keep the front and back part of the cage together
      • Pass the cables through both parts of the cage into the area where they attach to FEE module
      • Then attach the FEE, slide it into place
        • You need to unscrew the standoff on top that gets inserted first to go under the spring, then rescrew once it is past the spring but not fully inside the cage
          • standoff_to_be_unscrewed.jpeg
      • Use the 3D printed materials as a buffer to hold the post and the SiPM mounts, then start adding SiPMs to the top left slot (facing the FPM), adding them one by one and rotating between each


Author: Colin, Massimo

  • We're both in the lab for the first time in a while
  • New shipment from Leo
    • The black FPM baseplate they sent us doesn't have an anchor for the copper mount..
    • Also we'll need to figure out a way to deliver HV through that small connector
-- Colin Adams - 2022-01-21


Topic attachments
I Attachment History Action Size Date WhoSorted ascending Comment
Unknown file formatSLDPRT BoxwHole15p6.SLDPRT r1 manage 80.0 K 2022-02-02 - 20:24 ColinAdams  
Unknown file formatSTL BoxwHole15p6.STL r1 manage 15.3 K 2022-02-02 - 20:24 ColinAdams  
JPEGjpeg assembling_cage_w_FEE.jpeg r1 manage 239.2 K 2022-02-02 - 20:19 ColinAdams  
JPEGjpeg full_module_adapter_board.jpeg r1 manage 204.4 K 2022-02-02 - 20:19 ColinAdams  
JPEGjpeg full_module_adapter_board_front.jpeg r1 manage 192.6 K 2022-02-02 - 20:19 ColinAdams  
JPEGjpeg jutting_screw.jpeg r1 manage 186.6 K 2022-02-02 - 20:19 ColinAdams  
JPEGjpeg scratched_samtec.jpeg r1 manage 248.4 K 2022-02-02 - 20:19 ColinAdams  
JPEGjpeg scratched_samtec_2.jpeg r1 manage 165.7 K 2022-02-02 - 20:19 ColinAdams  
JPEGjpeg sipm_mounts.jpeg r1 manage 245.9 K 2022-02-02 - 20:19 ColinAdams  
JPEGjpeg standoff_to_be_unscrewed.jpeg r1 manage 205.0 K 2022-02-02 - 20:19 ColinAdams  
Edit | Attach | Watch | Print version | History: r5 < r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions
Topic revision: r5 - 2022-02-02 - ColinAdams
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback