NevisLabsELogJanuary2022 < Veritas

Veritas Web>PSCT>NevisLabsSetup>NevisLabsELog>NevisLabsELogJanuary2022 (2022-02-02, ColinAdams) (raw view)

---+ January 2022 eLog
---++ 2022-01-27

Author: Colin, Massimo
   * In the lab again
   * Starting to assemble the module in its cage
   * Some problem areas:
      * The screws that secure the standoffs on the FEE to the cage aren't flush against the cage, they jut out a little bit
      * Finding that some of the samtec cables are getting scratched at the edge
         * <img alt="scratched_samtec_2.jpeg" height="375" src="%ATTACHURL%/scratched_samtec_2.jpeg" title="scratched_samtec_2.jpeg" width="300" />
   * Two important notes:
      * The front part of the cage can be mounted already:
         * Keep the front and back part of the cage together
         * Pass the cables through both parts of the cage into the area where they attach to FEE module
         * Then attach the FEE, slide it into place
            * You need to unscrew the standoff on top that gets inserted first to go under the spring, then rescrew once it is past the spring but not fully inside the cage
               * <img alt="standoff_to_be_unscrewed.jpeg" height="225" src="%ATTACHURL%/standoff_to_be_unscrewed.jpeg" title="standoff_to_be_unscrewed.jpeg" width="300" />
         * Use the 3D printed materials as a buffer to hold the post and the SiPM mounts, then start adding SiPMs to the top left slot (facing the FPM), adding them one by one and rotating between each
            * 3D printed materials:
               * [[%ATTACHURL%/BoxwHole15p6.STL][BoxwHole15p6.STL]]
               * [[%ATTACHURL%/BoxwHole15p6.SLDPRT][BoxwHole15p6.SLDPRT]]
            * Safest way to hold the SiPMs is using roughly flat tweezers via the black SMART board connector port
---++ 2022-01-21

Author: Colin, Massimo
   * We're both in the lab for the first time in a while
   * New shipment from Leo
      * The black FPM baseplate they sent us doesn't have an anchor for the copper mount..
      * Also we'll need to figure out a way to deliver HV through that small connector
-- %USERSIG{ColinAdams - 2022-01-21}%

---++ Comments

%COMMENT%

Attachments

Topic attachments
I	Attachment	History	Action	Size	Date	Who
sldprt	BoxwHole15p6.SLDPRT	r1	manage	80.0 K	2022-02-02 - 20:24	ColinAdams
stl	BoxwHole15p6.STL	r1	manage	15.3 K	2022-02-02 - 20:24	ColinAdams
jpeg	assembling_cage_w_FEE.jpeg	r1	manage	239.2 K	2022-02-02 - 20:19	ColinAdams
jpeg	full_module_adapter_board.jpeg	r1	manage	204.4 K	2022-02-02 - 20:19	ColinAdams
jpeg	full_module_adapter_board_front.jpeg	r1	manage	192.6 K	2022-02-02 - 20:19	ColinAdams
jpeg	jutting_screw.jpeg	r1	manage	186.6 K	2022-02-02 - 20:19	ColinAdams
jpeg	scratched_samtec.jpeg	r1	manage	248.4 K	2022-02-02 - 20:19	ColinAdams
jpeg	scratched_samtec_2.jpeg	r1	manage	165.7 K	2022-02-02 - 20:19	ColinAdams
jpeg	sipm_mounts.jpeg	r1	manage	245.9 K	2022-02-02 - 20:19	ColinAdams
jpeg	standoff_to_be_unscrewed.jpeg	r1	manage	205.0 K	2022-02-02 - 20:19	ColinAdams

Topic revision: r5 - 2022-02-02 - ColinAdams

Veritas

Webs
ATLAS
DOE
Main
TWiki
Veritas