February 2022 eLog


Author: Colin, Massimo

  • connection profiles on ctalab computer (odo)
    • Ethernet for internet (eno1) should be connected with Profile 1
    • Ethernet for media converter (enp3s0) should be connected with TargetC
  • Hooking everything up to power now
    • Found that the 0.5 A level we set was current limiting, specifically to a spike in current at the start
    • We have raised the current limit to 1.0 A and now it seems to be working
    • With 12 V applied through adapter board to FEE (prior to connection), current holds steady at 0.64 A
  • Our module is module 3
  • working in software base: ~/software/CTA/svn/CCC/TargetIO/trunk/
    • ./INFN_FEE_QC.py -cfg defaults.yaml -p 3
-- Colin Adams - 2022-02-07


Edit | Attach | Watch | Print version | History: r7 | r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r2 - 2022-02-07 - ColinAdams
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback