February 2022 eLog

2022-02-07

Author: Colin, Massimo

  • connection profiles on ctalab computer (odo)
    • Ethernet for internet (eno1) should be connected with "Profile 1" profile
    • Ethernet for media converter (enp3s0) should be connected with " TargetC " profile
  • Hooking everything up to power now
    • Found that the 0.5 A level we set was current limiting, specifically to a spike in current at the start
    • We have raised the current limit to 1.0 A and now it seems to be working
    • With 12 V applied through adapter board to FEE (prior to connection), current holds steady at 0.64 A
  • Our module is module 3
  • Trying to take a pedestal run
    • 12 V bias only for adapter board (module), no HV
    • /working in software base: ~/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system
      • ./INFN_FEE_QC.py -p -npg -cfg defaults.yaml 3
        • (npg = no function generator)
    • We found that we had to bump up the current limit to 1.2 A
    • Pre-connection:
      • Current goes to 0.65 A and holds steady
    • Connection and during pedestal run:
      • Current goes to 1.09 A and holds steady
        • Is this current level expected?
-- Colin Adams - 2022-02-07

Comments


This topic: Veritas > PSCT > NevisLabsSetup > NevisLabsELog > NevisLabsELogFebruary2022
Topic revision: r3 - 2022-02-07 - ColinAdams
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback