TWiki> Main Web>Computing>LinuxCluster>Condor (revision 10)EditAttach

Batch Services at Nevis

This is a description of the batch job submission services available on the Linux cluster at Nevis Labs.

About the batch cluster

Batch manager

The system responsible for administering batch services is Users typically cannot log in to this machine; you submit and monitor jobs from your local box on the Linux cluster. As far as job submission and execution are concerned, the existence of may be completely transparent to you.

To use any of the condor commands given below, you have to set it up:

setup condor

Condor status and usage

The CondorView package has been set up so you can see how much of the batch cluster is in use, and by whom.

Fair use

The condor system is most efficient when it's handling a large number of small jobs. Long jobs tend to clog up the queues, and prevent others from doing their work.

As of Feb-2010, there is no system that gives some groups or users higher priority than others. However, condor comes with a default scheme for adjusting user priorities; here are the details.

The practical upshots of condor's default priority scheme:

  • If you use condor a lot, other users will tend to get higher priority when they submit jobs.
  • If your job takes more than an hour to run, there's a chance it will be pre-empted; that chance increases the longer the job runs.

If you use the vanilla environment (see below), as most users at Nevis must, for a job to be "pre-empted" means that it is suspended and until that same machine has an available queue.

To get an idea of your user resource consumption and how it compares to other users, use these commands:

condor_userprio -allusers 
The larger the number, the lower your priority in comparison to the other users listed.

What processing power is available

The following commands will show you the machines available to run your jobs, their status, and their resources:

condor_status -server 

Obviously, some machines are more powerful than others. Before you arbitrarily decide that only the most powerful machines are good enough for your jobs, consider:

  • It's true, a machine that's 1/4 as fast will take 4 times as long to execute your jobs. However, the demand for the faster machine may be more than four times as much; it's possible that your job will sit waiting in the queue longer than it would have taken to run on the slower box.

  • The CPU cycles on the slower machines are presently being wasted. You might be able to put them to some use.

  • If you have a large number of jobs to submit, the slower machine can chug away at a couple of them while the rest are waiting to execute on the faster processors.

The best way to tell Condor that you'd prefer your job to execute on the faster machines is to use the Rank attribute in your submit file:

Rank = Mips

With all that said, if you want to restrict your job to the faster machines, you can try a statement like the following in your submit file:

Requirements = (Mips > 2000) 

This would restrict your job to the fastest processors on the cluster.

All the machines on the batch farm are not the same

The batch farm is a heterogeneous collection of machines. If you're having problems with programs crashing on some systems but not on others, please read this page on compiler tools that can help solve this problem.

"Why isn't my job running on all the machines in the batch farm?"

There may be several reasons:

The heterogenous cluster

Not all machines in the farm are the same; they have different amounts of memory, disk space, and occasionally even installed libraries. Make sure you use the standardized compiler to compile your programs.

You'll also want to set up the standard Nevis environment explicitly in your jobs. If you look at the example described below, you'll see that the shell scripts all contain command such as:

# If you're using bash:
shopt -s expand_aliases
source /usr/nevis/adm/
setup root geant4

Finally, don't forget to set initialdir in your condor submit file.

The job requirements

There may be something explicit or implicit in the resources required to run your job. To pick an unrealistic example, if you job requires ksh and that shell isn't installed on machine, then it won't execute on the cluster. A more practical example: If you have the following in your job submit file:

Requirements = ( Memory > 1024)
then your job won't execute if the amount of memory per job queue is 1024 or less, including those machines with 1023 MB per queue to due rounding in the memory calculation.

If you think your job with ID 4402 should be able to execute on machine batch04, you can compare what condor thinks are the jobs requirements against what the machine offers:

condor_q -long -global 4402
condor_status -long batch04

Suspended jobs

As noted elsewhere on this page, we generally use the vanilla universe at Nevis. This means if a job is suspended on a given machine, it can only continue on that particular machine. If that machine is running other jobs, then the suspended job must wait.

Extra disk space

In addition to any RAID drives attached to your workgroup's servers, there are additional "common" RAID drives that are intended to be shared among the users of Nevis batch system. They were initially used by the ATLAS and D0 groups, but can be made available to other groups as the need arises. These disks are available via automount on the Linux cluster; each has a capacity of about 1.5TB.

The names of these RAID arrays are:

  • /a/data/condor/array1/
  • /a/data/condor/array2/

For example, the permissions on the drives have been set so that you can do the following from any machine on the Linux cluster (if you're a member of the ATLAS group):

cd /a/data/condor/array2/atlas/
mkdir $user
cd $user # ... create whatever files you want 

Important! If you're skimming this page, stop and read the following paragraph!

The files on these /data partitions, like those on the /data partitions of any other systems on the Nevis cluster, are not backed up. They are stored on RAID5 arrays, which are a reliable form of storage; there is monitoring software that warns if any individual drives have failed. However, RAID arrays have been known to fail (and we've had at least one such failure at Nevis). If you have any critical data stored on these drives, make sure you backup the files yourself.

One more time: the disks on these partitions are not backed up!

Submitting batch jobs

The batch job submission system we're using at Nevis is Condor, developed at the University of Wisconsin. You can learn more about Condor from the User's Manual.

To use Condor at Nevis, the simplest way is to use the setup command:

setup condor

This will set the variable $CONDOR_CONFIG to ~condor/etc/condor_config, and add ~condor/bin to your $PATH.

Do you want 10,000 e-mails?

By default, condor will send you an e-mail message as each of your jobs completes. If you've submitted 10,000 jobs, that means 10,000 e-mails. This can clog the mail server, and make your life miserable.

Please place the following line in your condor submit file:

Notification    = Error

This means that condor will only send you an e-mail if there's an error while running the job.

Use the vanilla environment

We have discovered that the vanilla environment described in the Condor manual does not behave exactly as documented at Nevis. The following advice may be helpful:

Unless you've specifically used the condor_compile command to compile your programs, you must submit your jobs in the "vanilla" universe. Any program that uses shared libraries cannot use condor_compile, and this includes most of the physics software at Nevis. Therefore, you are almost certainly required to have the following line in a command script:

universe = vanilla

Handling disk files

As you read through the User's Manual chapter on job submission, note that we use a shared file system at Nevis.

Because we use a shared file system at Nevis that's based on automount, it's a good idea to include the initialdir attribute in your command scripts. For example, when I submit a script that makes use of files in my directory /a/data/tanya/seligman/kit/TestArea/, I include the following line in my command script to make sure the executing machine has correctly mounted the directory:

initialdir = /a/data/tanya/seligman/kit/TestArea/ 

Important: Think about how you transfer your job's files

Picture this: You submit a condor batch procedure that runs thousands of jobs. Each one of those jobs reads and/or writes directly into a directory on your server, accessed via NFS. Let's say there are 200 batch queues in the Nevis condor system. That means that 200 jobs are trying to access the disk on your server at once.

Sounds like a recipe for disaster, doesn't it? You can crash your server by writing 200 files at once via NFS. It's happened several times at Nevis.

To solve this problem, don't rely on your job reading and writing files directly to a particular directory. Use commands like the following in your condor command file; look them up in the User's Manual:

should_transfer_files = YES
when_to_transfer_output = ON_EXIT
transfer_input_files = ...list of input files...

This will transfer your input files to the condor master server once, instead of 200 times; as your job is executing, it will write the output on a local area of the machine that's running the job. Once the job has finished executing, it will transfer the output file to the directory from which you submitted the job.

Result: you don't crash your server. You also don't clog up the network with unnecessary file transfers.

sh-style shells versus csh-style shells

There appears to be a difference in the way the sh and csh shells handle files in Condor. In sh, bash, or zsh (the default at Nevis) the examples in the Condor manual basically work as they are. In csh or tcsh, the scripts will fail due to "file not found" errors unless you do one of the following:

  • Transfer all working files to the executing machine with the lines:
should_transfer_files = YES 
when_to_transfer_output = ON_EXIT 

  • Include the full path name when you reference any file in your command script. For example, in my scripts, the following line fails:
executable = athena.csh
but the following succeeds:
executable = /a/data/tanya/seligman/kit/TestArea/athena.csh


The standard condor examples

If you're just starting to learn Condor, a good way to start is to copy the Condor examples:

cp -arv ~condor/condor-7.2.4/examples .
cd examples 

Read the README file; type make to compile the programs; type sh submit to submit a few test jobs.

You may notice that the sh_loop script will not execute; it will sit in the "Idle" state indefinitely. It won't execute unless you submit it in the vanilla universe as described below.

Examples that incorporate the tips on this page

Many of the above tips, and others, have been combined into a set of example scripts. The Athena-related scripts are in ~seligman/condor/; start with the README file, which will point you to the other relevant files in the directory. Note that those examples were prepared in 2005.

Submitting multiple jobs with one condor_submit command

An ATLAS example: Running Multiple Jobs On Condor

As of Jun-2008, you can find several examples of multiple job submission in /a/home/riverside/seligman/nusong/aria/work; these go further with the tips in the above link, to generate both numeric and text parameters that vary according to condor's process ID. Look in the *.cmd files, which will lead you in turn to some of the *.sh files in that directory. There are hopefully enough comments in those scripts to get you started.

Edit | Attach | Watch | Print version | History: r34 | r12 < r11 < r10 < r9 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r10 - 2010-03-06 - WilliamSeligman
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback