Difference: NevisLabsELogFebruary2022 (1 vs. 7)

Revision 72022-02-08 - ColinAdams

Line: 1 to 1
 
META TOPICPARENT name="NevisLabsELog"

February 2022 eLog

2022-02-07

Line: 28 to 28
 
      • The file is probably empty, given that the pulser was off and the trigger was set to external
      • The pulser check is not done by INFN_FEE_SMART_QC, but the pulser should be on for data taking
      • Checked that the bias was delivered correctly to the SMART board, see pictures
Changed:
<
<
      • For next test, we can either try and turn the pulser on or run a triggerscan on noise (the trigger is set to hardsync and not external, so the pulser should not be needed)BiasSiPM_2.jpeg
      • BiasSiPM.jpeg
>
>
      • For next test, we can either try and turn the pulser on or run a triggerscan on noise (the trigger is set to hardsync and not external, so the pulser should not be needed)
      • BiasSiPM_2.jpeg BiasSiPM.jpeg
 
  • At some point we need to investigate our disk partition issue
    • it appears that we only have 30 or so ish GB on our main disk, which is close to full already
    • meanwhile we have ~4 TB on the data disk

Revision 62022-02-08 - MassimoCapasso

Line: 1 to 1
 
META TOPICPARENT name="NevisLabsELog"

February 2022 eLog

2022-02-07

Line: 23 to 23
 
    • Connection and during pedestal run:
      • Current goes to 1.09 A and holds steady
        • Is this current level expected?
Added:
>
>
  • Tried to take a signal run using INFN_FEE_SMART_QC.py, using defaults_smart.yaml
    • Got an error "did you forget to enable datataking?"
      • The file is probably empty, given that the pulser was off and the trigger was set to external
      • The pulser check is not done by INFN_FEE_SMART_QC, but the pulser should be on for data taking
      • Checked that the bias was delivered correctly to the SMART board, see pictures
      • For next test, we can either try and turn the pulser on or run a triggerscan on noise (the trigger is set to hardsync and not external, so the pulser should not be needed)BiasSiPM_2.jpeg
      • BiasSiPM.jpeg
 
  • At some point we need to investigate our disk partition issue
    • it appears that we only have 30 or so ish GB on our main disk, which is close to full already
    • meanwhile we have ~4 TB on the data disk
Line: 35 to 42
 

Comments 


<--/commentPlugin-->
Added:
>
>
META FILEATTACHMENT attachment="BiasSiPM_2.jpeg" attr="" comment="" date="1644279637" name="BiasSiPM_2.jpeg" path="BiasSiPM_2.jpeg" size="192882" user="MassimoCapasso" version="1"
META FILEATTACHMENT attachment="BiasSiPM.jpeg" attr="" comment="" date="1644279660" name="BiasSiPM.jpeg" path="BiasSiPM.jpeg" size="186404" user="MassimoCapasso" version="1"

Revision 52022-02-07 - ColinAdams

Line: 1 to 1
 
META TOPICPARENT name="NevisLabsELog"

February 2022 eLog

2022-02-07

Line: 16 to 16
 
    • 12 V bias only for adapter board (module), no HV
    • /working in software base: ~/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system
      • ./INFN_FEE_QC.py -p -npg -cfg defaults.yaml 3
Changed:
<
<
        • (npg = no function generator)
>
>
        • (npg = no pulse generator)
 
    • We found that we had to bump up the current limit to 1.2 A
    • Pre-connection:
      • Current goes to 0.65 A and holds steady
    • Connection and during pedestal run:
      • Current goes to 1.09 A and holds steady
        • Is this current level expected?
Changed:
<
<

./INFN_FEE_QC.py -p -npg -cfg defaults.yaml 3
2022-02-07 16:09:55 - main - TEST_INFO - SVN revision: 42344M
2022-02-07 16:09:55 - main - TEST_INFO - Running command: ./INFN_FEE_QC.py -p -npg -cfg defaults.yaml 3
2022-02-07 16:09:55 - main - TEST_INFO - TC def file: /home/ctalab/software/CTA/svn/CCC/TargetDriver/trunk/config/TC_ASIC.def
2022-02-07 16:09:55 - main - TEST_INFO - T5TEA def file: /home/ctalab/software/CTA/svn/CCC/TargetDriver/trunk/config/T5TEA_ASIC.def
2022-02-07 16:09:55 - main - TEST_INFO - FPGA def file: /home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/fpga_utils/SCT_MSA_FPGA_Firmware0xC000000E.def
2022-02-07 16:09:55 - main - TEST_INFO - Chosen options:
2022-02-07 16:09:55 - main - TEST_INFO - TAG: ""
2022-02-07 16:09:55 - main - TEST_INFO - Pulse amplitude for signal run: 1.0 V
2022-02-07 16:09:55 - main - TEST_INFO - Pulse amplitude for trigger rate scan over PMTRef4: 0.3 V
2022-02-07 16:09:55 - main - TEST_INFO - Pulse amplitude used for trigger rate scan over "thresh" parameter: 0.05 V
2022-02-07 16:09:55 - main - TEST_INFO - Commanded pulse frequency to the function generator (Hz): 1113
2022-02-07 16:09:55 - main - TEST_INFO - Pulse offset: 0 V
2022-02-07 16:09:55 - main - TEST_INFO - Default Vped: 1200 DAC units
2022-02-07 16:09:55 - main - TEST_INFO - Stepsize for triggerscan over "PMTRef4" parameter: 10 DAC units
2022-02-07 16:09:55 - main - TEST_INFO - Stepsize for trigger rate scan over "thresh" parameter: 20 DAC units
2022-02-07 16:09:55 - main - TEST_INFO - Trigger delay: 450 ns
2022-02-07 16:09:55 - main - TEST_INFO - Starting channel for the analysis (channel 0 is default): 0
2022-02-07 16:09:55 - main - TEST_INFO - Number of channels to analyse (64 for all channels, set to 1 to speed up for debugging purposes): 64
2022-02-07 16:09:55 - main - TEST_INFO - Range of trigger groups to test (index: 0 to 15): [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
2022-02-07 16:09:55 - main - TEST_INFO - Enable power and signal integrity test: False
2022-02-07 16:09:55 - main - TEST_INFO - Enable pedestal data taking: True
2022-02-07 16:09:55 - main - TEST_INFO - Enable signal data taking/analysis: False
2022-02-07 16:09:55 - main - TEST_INFO - Enable linearity data taking/analysis: False
2022-02-07 16:09:55 - main - TEST_INFO - Enable trigger scan: False
2022-02-07 16:09:55 - main - TEST_INFO - Executing pedestal run...
2022-02-07 16:09:55 - main - TEST_INFO - Start pedestal data taking...

--- Logging error ---
Traceback (most recent call last):%|███████████████████████████████████████████▊ | 342/1024 [00:21<00:42, 16.13/s]
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 306, in daq
self.read_temperatures()
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 184, in read_temperatures
logger.info ("Temperature Aux: " + str(self.temp2))
Message: 'Temperature Aux: 41.4375'
--- Logging error ---
Traceback (most recent call last):%|████████████████████████████████████████████ | 344/1024 [00:21<00:42, 16.13/s]
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 305, in daq
logger.info("------ Taking hardsync data with delay of {} ns -------".format(i*32+offset))
Message: '------ Taking hardsync data with delay of 11034 ns -------'
Arguments: ()
--- Logging error ---
Traceback (most recent call last):
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 306, in daq
self.read_temperatures()
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 182, in read_temperatures
logger.info ("Temperature Pri: " + str(self.temp1))
Message: 'Temperature Pri: 41.6875'
Arguments: ()
--- Logging error ---
Traceback (most recent call last):
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 306, in daq
self.read_temperatures()
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 184, in read_temperatures
logger.info ("Temperature Aux: " + str(self.temp2))
Message: 'Temperature Aux: 41.4375'
Arguments: ()
Segmentation fault (core dumped)

>
>		 ./INFN_FEE_QC.py -p -npg -cfg defaults.yaml 3
2022-02-07 16:09:55 - main - TEST_INFO - SVN revision: 42344M
2022-02-07 16:09:55 - main - TEST_INFO - Running command: ./INFN_FEE_QC.py -p -npg -cfg defaults.yaml 3
2022-02-07 16:09:55 - main - TEST_INFO - TC def file: /home/ctalab/software/CTA/svn/CCC/TargetDriver/trunk/config/TC_ASIC.def
2022-02-07 16:09:55 - main - TEST_INFO - T5TEA def file: /home/ctalab/software/CTA/svn/CCC/TargetDriver/trunk/config/T5TEA_ASIC.def
2022-02-07 16:09:55 - main - TEST_INFO - FPGA def file: /home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/fpga_utils/SCT_MSA_FPGA_Firmware0xC000000E.def
2022-02-07 16:09:55 - main - TEST_INFO - Chosen options:
2022-02-07 16:09:55 - main - TEST_INFO - TAG: ""
2022-02-07 16:09:55 - main - TEST_INFO - Pulse amplitude for signal run: 1.0 V
2022-02-07 16:09:55 - main - TEST_INFO - Pulse amplitude for trigger rate scan over PMTRef4: 0.3 V
2022-02-07 16:09:55 - main - TEST_INFO - Pulse amplitude used for trigger rate scan over "thresh" parameter: 0.05 V
2022-02-07 16:09:55 - main - TEST_INFO - Commanded pulse frequency to the function generator (Hz): 1113
2022-02-07 16:09:55 - main - TEST_INFO - Pulse offset: 0 V
2022-02-07 16:09:55 - main - TEST_INFO - Default Vped: 1200 DAC units
2022-02-07 16:09:55 - main - TEST_INFO - Stepsize for triggerscan over "PMTRef4" parameter: 10 DAC units
2022-02-07 16:09:55 - main - TEST_INFO - Stepsize for trigger rate scan over "thresh" parameter: 20 DAC units
2022-02-07 16:09:55 - main - TEST_INFO - Trigger delay: 450 ns
2022-02-07 16:09:55 - main - TEST_INFO - Starting channel for the analysis (channel 0 is default): 0
2022-02-07 16:09:55 - main - TEST_INFO - Number of channels to analyse (64 for all channels, set to 1 to speed up for debugging purposes): 64
2022-02-07 16:09:55 - main - TEST_INFO - Range of trigger groups to test (index: 0 to 15): [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
2022-02-07 16:09:55 - main - TEST_INFO - Enable power and signal integrity test: False
2022-02-07 16:09:55 - main - TEST_INFO - Enable pedestal data taking: True
2022-02-07 16:09:55 - main - TEST_INFO - Enable signal data taking/analysis: False
2022-02-07 16:09:55 - main - TEST_INFO - Enable linearity data taking/analysis: False
2022-02-07 16:09:55 - main - TEST_INFO - Enable trigger scan: False
2022-02-07 16:09:55 - main - TEST_INFO - Executing pedestal run...
2022-02-07 16:09:55 - main - TEST_INFO - Start pedestal data taking...

--- Logging error ---
Traceback (most recent call last):%|███████████████████████████████████████████▊ | 342/1024 [00:21<00:42, 16.13/s]
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 306, in daq
self.read_temperatures()
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 184, in read_temperatures
logger.info ("Temperature Aux: " + str(self.temp2))
Message: 'Temperature Aux: 41.4375'
--- Logging error ---
Traceback (most recent call last):%|████████████████████████████████████████████ | 344/1024 [00:21<00:42, 16.13/s]
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 305, in daq
logger.info("------ Taking hardsync data with delay of {} ns -------".format(i*32+offset))
Message: '------ Taking hardsync data with delay of 11034 ns -------'
Arguments: ()
--- Logging error ---
Traceback (most recent call last):
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 306, in daq
self.read_temperatures()
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 182, in read_temperatures
logger.info ("Temperature Pri: " + str(self.temp1))
Message: 'Temperature Pri: 41.6875'
Arguments: ()
--- Logging error ---
Traceback (most recent call last):
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 306, in daq
self.read_temperatures()
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 184, in read_temperatures
logger.info ("Temperature Aux: " + str(self.temp2))
Message: 'Temperature Aux: 41.4375'
Arguments: ()
Segmentation fault (core dumped)
  -- Colin Adams - 2022-02-07

Comments

Deleted:
<
<
<--/commentPlugin-->
 \ No newline at end of file
Added:
>
>
<--/commentPlugin-->

Revision 42022-02-07 - MassimoCapasso

Line: 1 to 1
 
META TOPICPARENT name="NevisLabsELog"

February 2022 eLog

2022-02-07

Line: 23 to 23
 
    • Connection and during pedestal run:
      • Current goes to 1.09 A and holds steady
        • Is this current level expected?
Added:
>
>

./INFN_FEE_QC.py -p -npg -cfg defaults.yaml 3
2022-02-07 16:09:55 - main - TEST_INFO - SVN revision: 42344M
2022-02-07 16:09:55 - main - TEST_INFO - Running command: ./INFN_FEE_QC.py -p -npg -cfg defaults.yaml 3
2022-02-07 16:09:55 - main - TEST_INFO - TC def file: /home/ctalab/software/CTA/svn/CCC/TargetDriver/trunk/config/TC_ASIC.def
2022-02-07 16:09:55 - main - TEST_INFO - T5TEA def file: /home/ctalab/software/CTA/svn/CCC/TargetDriver/trunk/config/T5TEA_ASIC.def
2022-02-07 16:09:55 - main - TEST_INFO - FPGA def file: /home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/fpga_utils/SCT_MSA_FPGA_Firmware0xC000000E.def
2022-02-07 16:09:55 - main - TEST_INFO - Chosen options:
2022-02-07 16:09:55 - main - TEST_INFO - TAG: ""
2022-02-07 16:09:55 - main - TEST_INFO - Pulse amplitude for signal run: 1.0 V
2022-02-07 16:09:55 - main - TEST_INFO - Pulse amplitude for trigger rate scan over PMTRef4: 0.3 V
2022-02-07 16:09:55 - main - TEST_INFO - Pulse amplitude used for trigger rate scan over "thresh" parameter: 0.05 V
2022-02-07 16:09:55 - main - TEST_INFO - Commanded pulse frequency to the function generator (Hz): 1113
2022-02-07 16:09:55 - main - TEST_INFO - Pulse offset: 0 V
2022-02-07 16:09:55 - main - TEST_INFO - Default Vped: 1200 DAC units
2022-02-07 16:09:55 - main - TEST_INFO - Stepsize for triggerscan over "PMTRef4" parameter: 10 DAC units
2022-02-07 16:09:55 - main - TEST_INFO - Stepsize for trigger rate scan over "thresh" parameter: 20 DAC units
2022-02-07 16:09:55 - main - TEST_INFO - Trigger delay: 450 ns
2022-02-07 16:09:55 - main - TEST_INFO - Starting channel for the analysis (channel 0 is default): 0
2022-02-07 16:09:55 - main - TEST_INFO - Number of channels to analyse (64 for all channels, set to 1 to speed up for debugging purposes): 64
2022-02-07 16:09:55 - main - TEST_INFO - Range of trigger groups to test (index: 0 to 15): [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
2022-02-07 16:09:55 - main - TEST_INFO - Enable power and signal integrity test: False
2022-02-07 16:09:55 - main - TEST_INFO - Enable pedestal data taking: True
2022-02-07 16:09:55 - main - TEST_INFO - Enable signal data taking/analysis: False
2022-02-07 16:09:55 - main - TEST_INFO - Enable linearity data taking/analysis: False
2022-02-07 16:09:55 - main - TEST_INFO - Enable trigger scan: False
2022-02-07 16:09:55 - main - TEST_INFO - Executing pedestal run...
2022-02-07 16:09:55 - main - TEST_INFO - Start pedestal data taking...

--- Logging error ---
Traceback (most recent call last):%|███████████████████████████████████████████▊ | 342/1024 [00:21<00:42, 16.13/s]
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 306, in daq
self.read_temperatures()
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 184, in read_temperatures
logger.info ("Temperature Aux: " + str(self.temp2))
Message: 'Temperature Aux: 41.4375'
--- Logging error ---
Traceback (most recent call last):%|████████████████████████████████████████████ | 344/1024 [00:21<00:42, 16.13/s]
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 305, in daq
logger.info("------ Taking hardsync data with delay of {} ns -------".format(i*32+offset))
Message: '------ Taking hardsync data with delay of 11034 ns -------'
Arguments: ()
--- Logging error ---
Traceback (most recent call last):
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 306, in daq
self.read_temperatures()
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 182, in read_temperatures
logger.info ("Temperature Pri: " + str(self.temp1))
Message: 'Temperature Pri: 41.6875'
Arguments: ()
--- Logging error ---
Traceback (most recent call last):
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1085, in emit
self.flush()
File "/home/ctalab/anaconda3/envs/cta/lib/python3.8/logging/__init__.py", line 1065, in flush
self.stream.flush()
OSError: [Errno 28] No space left on device
Call stack:
File "./INFN_FEE_QC.py", line 474, in <module>
ret = exec_pedestal(args_pedestal)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/run_pedestal.py", line 106, in exec_pedestal
take_pedestal(outfile, nblocks=nblocks, packets=packets, daq_time=daq_time, triggerdelay=triggerdelay, vped=_vp, sst=sst, vtrim=vtrim, triggertype=triggertype )
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 483, in take_pedestal
moduleTC.daq(outfile, daq_time=0.05, delay_loop=True, check_pkts=True)
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 306, in daq
self.read_temperatures()
File "/home/ctalab/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system/TC_utils.py", line 184, in read_temperatures
logger.info ("Temperature Aux: " + str(self.temp2))
Message: 'Temperature Aux: 41.4375'
Arguments: ()
Segmentation fault (core dumped)

 -- Colin Adams - 2022-02-07

Comments

Revision 32022-02-07 - ColinAdams

Line: 1 to 1
 
META TOPICPARENT name="NevisLabsELog"

February 2022 eLog

2022-02-07

Author: Colin, Massimo

  • connection profiles on ctalab computer (odo)
Changed:
<
<
    • Ethernet for internet (eno1) should be connected with Profile 1
    • Ethernet for media converter (enp3s0) should be connected with TargetC
>
>
    • Ethernet for internet (eno1) should be connected with "Profile 1" profile
    • Ethernet for media converter (enp3s0) should be connected with " TargetC " profile
 
  • Hooking everything up to power now
    • Found that the 0.5 A level we set was current limiting, specifically to a spike in current at the start
    • We have raised the current limit to 1.0 A and now it seems to be working
    • With 12 V applied through adapter board to FEE (prior to connection), current holds steady at 0.64 A
  • Our module is module 3
Changed:
<
<
  • working in software base: ~/software/CTA/svn/CCC/TargetIO/trunk/
    • ./INFN_FEE_QC.py -cfg defaults.yaml -p 3
>
>
  • Trying to take a pedestal run
    • 12 V bias only for adapter board (module), no HV
    • /working in software base: ~/software/CTA/svn/CCC/TargetIO/trunk/script/SCT_TM/INFN_test_system
      • ./INFN_FEE_QC.py -p -npg -cfg defaults.yaml 3
        • (npg = no function generator)
    • We found that we had to bump up the current limit to 1.2 A
    • Pre-connection:
      • Current goes to 0.65 A and holds steady
    • Connection and during pedestal run:
      • Current goes to 1.09 A and holds steady
        • Is this current level expected?
 -- Colin Adams - 2022-02-07

Comments

Revision 22022-02-07 - ColinAdams

Line: 1 to 1
 
META TOPICPARENT name="NevisLabsELog"

February 2022 eLog

2022-02-07

Author: Colin, Massimo

Changed:
<
<
>
>
  • connection profiles on ctalab computer (odo)
    • Ethernet for internet (eno1) should be connected with Profile 1
    • Ethernet for media converter (enp3s0) should be connected with TargetC
  • Hooking everything up to power now
    • Found that the 0.5 A level we set was current limiting, specifically to a spike in current at the start
    • We have raised the current limit to 1.0 A and now it seems to be working
    • With 12 V applied through adapter board to FEE (prior to connection), current holds steady at 0.64 A
  • Our module is module 3
  • working in software base: ~/software/CTA/svn/CCC/TargetIO/trunk/
    • ./INFN_FEE_QC.py -cfg defaults.yaml -p 3
 -- Colin Adams - 2022-02-07

Comments

Revision 12022-02-07 - ColinAdams

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="NevisLabsELog"

February 2022 eLog

2022-02-07

Author: Colin, Massimo

-- Colin Adams - 2022-02-07

Comments 

<--/commentPlugin-->
View topic | History: r7 < r6 < r5 < r4 | More topic actions...
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback